#Rexroth PVV5-1X/154RA15DMB Vane pumpParts Table 1# | ||||||||
|---|---|---|---|---|---|---|---|---|
| Pump Right Rotating Group | 0,25 Kg | 0.0 | N/A | 82 mm | ||||
| Coil Spring | 0.510 Kg | 2.0 | N/A | 72 mm | ||||
| Piston Sets | 0.116 Kg | 30MM Bore; 72MM Outside Diameter; 30.2MM Width; Open; No Flush Ground; Ball Bearing; Double Row of Balls; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring | C0-Medium | 79.375 | ||||
| Swash Plate Assemblies | 1.418 | 0.0 | N/A | 30 mm | ||||
| Back Plate | 1.3 | 0.0 | N/A | 82 mm | ||||
| Housings Casings | 4.77 | 0.0 | N/A | VV (Non-Contact Rubber Seal) | ||||
| Disc Springs | - | 0.0 | N/A | 65 kN | ||||
| Press Pin | 0.61 | 0.0 | N/A | 4.77 | ||||
| Pressure Plate | 37 mm65 mm | 0.0 | 79.375 | 1045 Carbon Steel | ||||
| Shafts | 0.61 | 2.559 Inch / 65 Millimeter | Electroless Nickel Plating | 37 mm65 mm | ||||
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Voltage:5212ANR; Maximum rotational speed:60x110x36.5; Rotary stiffness:60; Control Pressure Measurement:110; Maximum angular acceleration:36.5; Torque:60 mm; Weight (approx.):110 mm; Drive Speed:36.5 mm; Drive Power:36.5 mm; Maximum Torque:3.28 mm; Rate Of Pressure Change:2.7 mm; Power:2.46 mm; Moment of inertia rotary group:1.5 mm; Case volume:106.81 mm; Maximum Axial Force At Standstill:116.6 mm; Pilot Pressure:1.36 Kg; Maximum Permissible Pilot Pressure:71,5 kN; Maximum Permissible Speed (limit Speed):58,5 kN; Sequence Valve:3800 r/min; Control Fluid Drain:Snap Ring Groove with Snap Ring; Determining Operating Characteristics:Double Row; Pressurefree Operation:Cylindrical Bore; Nominal Resistance:60 mm; Load Pressure:110 mm; Maximum Volume Flow:36.5 mm; Fillet Radius/Chamfer:1.5 mm; Snap Ring Width:2.5 mm; Snap Ring Outside Diameter:116.6 mm; a (max):3.3 mm; Dynamic Load Rating:71,500 N; Static Load Rating:58,500 N; Limiting Speed - Grease:3,800 rpm; Limiting Speed - Oil:5,000 rpm; Radial Clearance:0.008 to 0.028 mm; da:69 mm; Da:101 mm; Dx:118 mm; ra:1.5 mm; Cy:5.4 mm; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Maximum angular acceleration:5212ANR; Power:60x110x36.5; Control Pressure Measurement:60; Maximum Permissible Speed (limit Speed):110; Rate Of Pressure Change:36.5; Maximum Torque:60 mm; Sequence Valve:110 mm; Case volume:36.5 mm; Drive Power:36.5 mm; Maximum Volume Flow:3.28 mm; Maximum rotational speed:2.7 mm; Voltage:2.46 mm; Torque:1.5 mm; Determining Operating Characteristics:106.81 mm; Maximum Axial Force At Standstill:116.6 mm; Pilot Pressure:1.36 Kg; Load Pressure:71,5 kN; Flow:58,5 kN; Nominal Resistance:3800 r/min; Moment of inertia rotary group:Snap Ring Groove with Snap Ring; Pressurefree Operation:Double Row; Drive Speed:Cylindrical Bore; Control Fluid Drain:60 mm; Weight (approx.):110 mm; Displacement, geometric, per revolution:36.5 mm; Fillet Radius/Chamfer:1.5 mm; Snap Ring Width:2.5 mm; Snap Ring Outside Diameter:116.6 mm; a (max):3.3 mm; Dynamic Load Rating:71,500 N; Static Load Rating:58,500 N; Limiting Speed - Grease:3,800 rpm; Limiting Speed - Oil:5,000 rpm; Radial Clearance:0.008 to 0.028 mm; da:69 mm; Da:101 mm; Dx:118 mm; ra:1.5 mm; Cy:5.4 mm; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Control Pressure Measurement:5212ANR; Nominal Resistance:60x110x36.5; Flow:60; Drive Power:110; Power:36.5; Maximum Permissible Speed (limit Speed):60 mm; Control Fluid Drain:110 mm; Case volume:36.5 mm; Maximum Axial Force At Standstill:36.5 mm; Rate Of Pressure Change:3.28 mm; Torque:2.7 mm; Maximum Torque:2.46 mm; Moment of inertia rotary group:1.5 mm; Maximum Permissible Pilot Pressure:106.81 mm; Displacement, geometric, per revolution:116.6 mm; Maximum angular acceleration:1.36 Kg; Load Pressure:71,5 kN; Rotary stiffness:58,5 kN; Drive Speed:3800 r/min; Maximum rotational speed:Snap Ring Groove with Snap Ring; Sequence Valve:Double Row; Pilot Pressure:Cylindrical Bore; Weight (approx.):60 mm; Determining Operating Characteristics:110 mm; Voltage:36.5 mm; Fillet Radius/Chamfer:1.5 mm; Snap Ring Width:2.5 mm; Snap Ring Outside Diameter:116.6 mm; a (max):3.3 mm; Dynamic Load Rating:71,500 N; Static Load Rating:58,500 N; Limiting Speed - Grease:3,800 rpm; Limiting Speed - Oil:5,000 rpm; Radial Clearance:0.008 to 0.028 mm; da:69 mm; Da:101 mm; Dx:118 mm; ra:1.5 mm; Cy:5.4 mm; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Control Pressure Measurement:5212ANR; Weight (approx.):60x110x36.5; Voltage:60; Displacement, geometric, per revolution:110; Power:36.5; Drive Power:60 mm; Maximum Permissible Pilot Pressure:110 mm; Moment of inertia rotary group:36.5 mm; Maximum angular acceleration:36.5 mm; Pilot Pressure:3.28 mm; Sequence Valve:2.7 mm; Rate Of Pressure Change:2.46 mm; Determining Operating Characteristics:1.5 mm; Maximum Axial Force At Standstill:106.81 mm; Control Fluid Drain:116.6 mm; Torque:1.36 Kg; Drive Speed:71,5 kN; Pressurefree Operation:58,5 kN; Rotary stiffness:3800 r/min; Maximum Volume Flow:Snap Ring Groove with Snap Ring; Nominal Resistance:Double Row; Flow:Cylindrical Bore; Load Pressure:60 mm; Case volume:110 mm; Maximum Torque:36.5 mm; Fillet Radius/Chamfer:1.5 mm; Snap Ring Width:2.5 mm; Snap Ring Outside Diameter:116.6 mm; a (max):3.3 mm; Dynamic Load Rating:71,500 N; Static Load Rating:58,500 N; Limiting Speed - Grease:3,800 rpm; Limiting Speed - Oil:5,000 rpm; Radial Clearance:0.008 to 0.028 mm; da:69 mm; Da:101 mm; Dx:118 mm; ra:1.5 mm; Cy:5.4 mm; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Maximum Volume Flow:5212ANR; Maximum angular acceleration:60x110x36.5; Control Pressure Measurement:60; Drive Power:110; Power:36.5; Flow:60 mm; Maximum Permissible Speed (limit Speed):110 mm; Sequence Valve:36.5 mm; Case volume:36.5 mm; Weight (approx.):3.28 mm; Maximum Axial Force At Standstill:2.7 mm; Drive Speed:2.46 mm; Pressurefree Operation:1.5 mm; Displacement, geometric, per revolution:106.81 mm; Control Fluid Drain:116.6 mm; Rotary stiffness:1.36 Kg; Determining Operating Characteristics:71,5 kN; Maximum Torque:58,5 kN; Moment of inertia rotary group:3800 r/min; Maximum Permissible Pilot Pressure:Snap Ring Groove with Snap Ring; Rate Of Pressure Change:Double Row; Torque:Cylindrical Bore; Voltage:60 mm; Pilot Pressure:110 mm; Maximum rotational speed:36.5 mm; Fillet Radius/Chamfer:1.5 mm; Snap Ring Width:2.5 mm; Snap Ring Outside Diameter:116.6 mm; a (max):3.3 mm; Dynamic Load Rating:71,500 N; Static Load Rating:58,500 N; Limiting Speed - Grease:3,800 rpm; Limiting Speed - Oil:5,000 rpm; Radial Clearance:0.008 to 0.028 mm; da:69 mm; Da:101 mm; Dx:118 mm; ra:1.5 mm; Cy:5.4 mm; |
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Power:5212ANR; Maximum Torque:60x110x36.5; Maximum rotational speed:60; Moment of inertia rotary group:110; Maximum Axial Force At Standstill:36.5; Flow:60 mm; Determining Operating Characteristics:110 mm; Pilot Pressure:36.5 mm; Rotary stiffness:36.5 mm; Maximum Permissible Pilot Pressure:3.28 mm; Maximum Volume Flow:2.7 mm; Maximum angular acceleration:2.46 mm; Drive Power:1.5 mm; Case volume:106.81 mm; Torque:116.6 mm; Load Pressure:1.36 Kg; Pressurefree Operation:71,5 kN; Displacement, geometric, per revolution:58,5 kN; Voltage:3800 r/min; Rate Of Pressure Change:Snap Ring Groove with Snap Ring; Control Pressure Measurement:Double Row; Weight (approx.):Cylindrical Bore; Control Fluid Drain:60 mm; Maximum Permissible Speed (limit Speed):110 mm; Sequence Valve:36.5 mm; Fillet Radius/Chamfer:1.5 mm; Snap Ring Width:2.5 mm; Snap Ring Outside Diameter:116.6 mm; a (max):3.3 mm; Dynamic Load Rating:71,500 N; Static Load Rating:58,500 N; Limiting Speed - Grease:3,800 rpm; Limiting Speed - Oil:5,000 rpm; Radial Clearance:0.008 to 0.028 mm; da:69 mm; Da:101 mm; Dx:118 mm; ra:1.5 mm; Cy:5.4 mm; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Torque:5212ANR; Maximum Volume Flow:60x110x36.5; Load Pressure:60; Control Pressure Measurement:110; Power:36.5; Pilot Pressure:60 mm; Weight (approx.):110 mm; Case volume:36.5 mm; Maximum Axial Force At Standstill:36.5 mm; Maximum rotational speed:3.28 mm; Maximum Torque:2.7 mm; Drive Power:2.46 mm; Flow:1.5 mm; Control Fluid Drain:106.81 mm; Drive Speed:116.6 mm; Maximum Permissible Speed (limit Speed):1.36 Kg; Nominal Resistance:71,5 kN; Determining Operating Characteristics:58,5 kN; Moment of inertia rotary group:3800 r/min; Voltage:Snap Ring Groove with Snap Ring; Rotary stiffness:Double Row; Maximum Permissible Pilot Pressure:Cylindrical Bore; Displacement, geometric, per revolution:60 mm; Maximum angular acceleration:110 mm; Pressurefree Operation:36.5 mm; Fillet Radius/Chamfer:1.5 mm; Snap Ring Width:2.5 mm; Snap Ring Outside Diameter:116.6 mm; a (max):3.3 mm; Dynamic Load Rating:71,500 N; Static Load Rating:58,500 N; Limiting Speed - Grease:3,800 rpm; Limiting Speed - Oil:5,000 rpm; Radial Clearance:0.008 to 0.028 mm; da:69 mm; Da:101 mm; Dx:118 mm; ra:1.5 mm; Cy:5.4 mm; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Maximum Permissible Pilot Pressure:5212ANR; Voltage:60x110x36.5; Maximum Axial Force At Standstill:60; Load Pressure:110; Pressurefree Operation:36.5; Drive Speed:60 mm; Maximum Torque:110 mm; Control Pressure Measurement:36.5 mm; Rotary stiffness:36.5 mm; Case volume:3.28 mm; Maximum Volume Flow:2.7 mm; Drive Power:2.46 mm; Weight (approx.):1.5 mm; Moment of inertia rotary group:106.81 mm; Maximum angular acceleration:116.6 mm; Flow:1.36 Kg; Torque:71,5 kN; Maximum rotational speed:58,5 kN; Sequence Valve:3800 r/min; Nominal Resistance:Snap Ring Groove with Snap Ring; Determining Operating Characteristics:Double Row; Maximum Permissible Speed (limit Speed):Cylindrical Bore; Pilot Pressure:60 mm; Rate Of Pressure Change:110 mm; Displacement, geometric, per revolution:36.5 mm; Fillet Radius/Chamfer:1.5 mm; Snap Ring Width:2.5 mm; Snap Ring Outside Diameter:116.6 mm; a (max):3.3 mm; Dynamic Load Rating:71,500 N; Static Load Rating:58,500 N; Limiting Speed - Grease:3,800 rpm; Limiting Speed - Oil:5,000 rpm; Radial Clearance:0.008 to 0.028 mm; da:69 mm; Da:101 mm; Dx:118 mm; ra:1.5 mm; Cy:5.4 mm; |
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Load Pressure:5212ANR; Torque:60x110x36.5; Control Fluid Drain:60; Maximum Permissible Speed (limit Speed):110; Maximum Volume Flow:36.5; Maximum Permissible Pilot Pressure:60 mm; Nominal Resistance:110 mm; Rate Of Pressure Change:36.5 mm; Moment of inertia rotary group:36.5 mm; Flow:3.28 mm; Power:2.7 mm; Drive Speed:2.46 mm; Weight (approx.):1.5 mm; Pilot Pressure:106.81 mm; Control Pressure Measurement:116.6 mm; Rotary stiffness:1.36 Kg; Determining Operating Characteristics:71,5 kN; Voltage:58,5 kN; Maximum Torque:3800 r/min; Case volume:Snap Ring Groove with Snap Ring; Maximum Axial Force At Standstill:Double Row; Drive Power:Cylindrical Bore; Sequence Valve:60 mm; Pressurefree Operation:110 mm; Displacement, geometric, per revolution:36.5 mm; Fillet Radius/Chamfer:1.5 mm; Snap Ring Width:2.5 mm; Snap Ring Outside Diameter:116.6 mm; a (max):3.3 mm; Dynamic Load Rating:71,500 N; Static Load Rating:58,500 N; Limiting Speed - Grease:3,800 rpm; Limiting Speed - Oil:5,000 rpm; Radial Clearance:0.008 to 0.028 mm; da:69 mm; Da:101 mm; Dx:118 mm; ra:1.5 mm; Cy:5.4 mm; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Voltage:5212ANR; Maximum Axial Force At Standstill:60x110x36.5; Torque:60; Displacement, geometric, per revolution:110; Weight (approx.):36.5; Maximum Torque:60 mm; Maximum rotational speed:110 mm; Determining Operating Characteristics:36.5 mm; Load Pressure:36.5 mm; Control Pressure Measurement:3.28 mm; Case volume:2.7 mm; Maximum Permissible Speed (limit Speed):2.46 mm; Pilot Pressure:1.5 mm; Power:106.81 mm; Moment of inertia rotary group:116.6 mm; Drive Speed:1.36 Kg; Rotary stiffness:71,5 kN; Maximum Volume Flow:58,5 kN; Flow:3800 r/min; Maximum angular acceleration:Snap Ring Groove with Snap Ring; Drive Power:Double Row; Maximum Permissible Pilot Pressure:Cylindrical Bore; Pressurefree Operation:60 mm; Control Fluid Drain:110 mm; Nominal Resistance:36.5 mm; Fillet Radius/Chamfer:1.5 mm; Snap Ring Width:2.5 mm; Snap Ring Outside Diameter:116.6 mm; a (max):3.3 mm; Dynamic Load Rating:71,500 N; Static Load Rating:58,500 N; Limiting Speed - Grease:3,800 rpm; Limiting Speed - Oil:5,000 rpm; Radial Clearance:0.008 to 0.028 mm; da:69 mm; Da:101 mm; Dx:118 mm; ra:1.5 mm; Cy:5.4 mm; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Pressurefree Operation:5212ANR; Flow:60x110x36.5; Drive Speed:60; Rotary stiffness:110; Drive Power:36.5; Case volume:60 mm; Rate Of Pressure Change:110 mm; Torque:36.5 mm; Maximum Permissible Pilot Pressure:36.5 mm; Maximum Axial Force At Standstill:3.28 mm; Maximum Torque:2.7 mm; Displacement, geometric, per revolution:2.46 mm; Maximum Volume Flow:1.5 mm; Control Fluid Drain:106.81 mm; Pilot Pressure:116.6 mm; Sequence Valve:1.36 Kg; Voltage:71,5 kN; Maximum Permissible Speed (limit Speed):58,5 kN; Maximum rotational speed:3800 r/min; Moment of inertia rotary group:Snap Ring Groove with Snap Ring; Control Pressure Measurement:Double Row; Weight (approx.):Cylindrical Bore; Nominal Resistance:60 mm; Determining Operating Characteristics:110 mm; Load Pressure:36.5 mm; Fillet Radius/Chamfer:1.5 mm; Snap Ring Width:2.5 mm; Snap Ring Outside Diameter:116.6 mm; a (max):3.3 mm; Dynamic Load Rating:71,500 N; Static Load Rating:58,500 N; Limiting Speed - Grease:3,800 rpm; Limiting Speed - Oil:5,000 rpm; Radial Clearance:0.008 to 0.028 mm; da:69 mm; Da:101 mm; Dx:118 mm; ra:1.5 mm; Cy:5.4 mm; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Maximum angular acceleration:5212ANR; Maximum Torque:60x110x36.5; Determining Operating Characteristics:60; Torque:110; Maximum Permissible Pilot Pressure:36.5; Moment of inertia rotary group:60 mm; Drive Power:110 mm; Control Fluid Drain:36.5 mm; Maximum Volume Flow:36.5 mm; Nominal Resistance:3.28 mm; Voltage:2.7 mm; Rate Of Pressure Change:2.46 mm; Pilot Pressure:1.5 mm; Rotary stiffness:106.81 mm; Case volume:116.6 mm; Sequence Valve:1.36 Kg; Flow:71,5 kN; Maximum Axial Force At Standstill:58,5 kN; Control Pressure Measurement:3800 r/min; Load Pressure:Snap Ring Groove with Snap Ring; Power:Double Row; Maximum rotational speed:Cylindrical Bore; Pressurefree Operation:60 mm; Displacement, geometric, per revolution:110 mm; Drive Speed:36.5 mm; Fillet Radius/Chamfer:1.5 mm; Snap Ring Width:2.5 mm; Snap Ring Outside Diameter:116.6 mm; a (max):3.3 mm; Dynamic Load Rating:71,500 N; Static Load Rating:58,500 N; Limiting Speed - Grease:3,800 rpm; Limiting Speed - Oil:5,000 rpm; Radial Clearance:0.008 to 0.028 mm; da:69 mm; Da:101 mm; Dx:118 mm; ra:1.5 mm; Cy:5.4 mm; |
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Rexroth PVV5-1X/154RA15DMB Vane pump Video