#Rexroth PVV4-1X/113RA15DMB Vane pumpParts Table 1# | ||||||||
|---|---|---|---|---|---|---|---|---|
| Swash Plate Assy | 60,325 mm | Metric | 2,6 Kg | 65,1 mm | ||||
| Retainer Plate | 38,1 mm | 85,725 mm | 0,857 Kg | 30,162 mm | ||||
| Friction Plate | 2.188 Inch | 55.575 Millimeter | 4.331 Inch | 110.007 Millimeter | 1.348 | 2-3/16" Bore; Wide Inner Ring; Ball Bearing; 1-63/64" Length Thru Bore; 1.024" Outer Race Width; 4.331" Outside Diameter; Relubricatable; Single Lip Contact Seal; Set Screw Mountin | ||||
| Shoe Plates | 1.378 Inch | 35 Millimeter | 3.15 Inch | 80 Millimeter | 0.547 | 0.827 Inch | 21 Millimeter | ||||
| Seal Kit For Hyd Pump | 52 | 3.071 Inch | 78 Millimeter | 0.02 | 16.1 kN | ||||
| Ball Joint | 1.378 Inch | 35 Millimeter | 3.15 Inch | 80 Millimeter | 0.494 | Oil Seal | ||||
| Back Plate | 1.00751 | 38 mm | 4.1 | 38,1 | ||||
| Ball Guide | 0.9375 in | 2.0472 in | -40 °C | Thrust Bearing | ||||
| Cylinder Blocks | 20 mm | 52 mm | 0.4 | 15 mm | ||||
| Pump Right Rotating Group | 62,738 mm | 101,6 mm | Set Screw Collar | 25,4 mm | ||||
| The Thrust Plate | 40 mm | 76,2 mm | 30,162 mm | 17,462 mm | ||||
| Bearings | 1.49 | Spherical | None | Yes | ||||
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Sequence Valve:7/16 in; Case volume:50000; Load Pressure:9/16 in; Rotary stiffness:Static 8000 / Dynamic 2000 (psi); Drive Speed:3/4 in; Nominal Resistance:1200 (sfm); Maximum Volume Flow:Plain Sleeve; Maximum Torque:Oilite®, Synthetic Performance Difference®; Moment of inertia rotary group:Oil-Impregnated Bronze; Voltage:SAE 841, CT-1000-K26, ASTM B438 GR 1 TYPE II; Maximum Axial Force At Standstill:None; Control Pressure Measurement:Click here; Maximum rotational speed:-35 °F to +300 °F; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Case volume:7/16 in; Sequence Valve:50000; Flow:9/16 in; Pilot Pressure:Static 8000 / Dynamic 2000 (psi); Drive Speed:3/4 in; Displacement, geometric, per revolution:1200 (sfm); Maximum rotational speed:Plain Sleeve; Torque:Oilite®, Synthetic Performance Difference®; Pressurefree Operation:Oil-Impregnated Bronze; Rotary stiffness:SAE 841, CT-1000-K26, ASTM B438 GR 1 TYPE II; Drive Power:None; Voltage:Click here; Maximum Volume Flow:-35 °F to +300 °F; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Pilot Pressure:7/16 in; Voltage:50000; Maximum rotational speed:9/16 in; Maximum Torque:Static 8000 / Dynamic 2000 (psi); Control Fluid Drain:3/4 in; Displacement, geometric, per revolution:1200 (sfm); Torque:Plain Sleeve; Rotary stiffness:Oilite®, Synthetic Performance Difference®; Case volume:Oil-Impregnated Bronze; Weight (approx.):SAE 841, CT-1000-K26, ASTM B438 GR 1 TYPE II; Determining Operating Characteristics:None; Power:Click here; Rate Of Pressure Change:-35 °F to +300 °F; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Maximum rotational speed:7/16 in; Maximum Axial Force At Standstill:50000; Load Pressure:9/16 in; Weight (approx.):Static 8000 / Dynamic 2000 (psi); Flow:3/4 in; Pressurefree Operation:1200 (sfm); Control Fluid Drain:Plain Sleeve; Maximum Torque:Oilite®, Synthetic Performance Difference®; Control Pressure Measurement:Oil-Impregnated Bronze; Maximum angular acceleration:SAE 841, CT-1000-K26, ASTM B438 GR 1 TYPE II; Displacement, geometric, per revolution:None; Maximum Volume Flow:Click here; Drive Speed:-35 °F to +300 °F; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Control Pressure Measurement:7/16 in; Flow:50000; Moment of inertia rotary group:9/16 in; Torque:Static 8000 / Dynamic 2000 (psi); Maximum rotational speed:3/4 in; Maximum angular acceleration:1200 (sfm); Load Pressure:Plain Sleeve; Voltage:Oilite®, Synthetic Performance Difference®; Rate Of Pressure Change:Oil-Impregnated Bronze; Maximum Torque:SAE 841, CT-1000-K26, ASTM B438 GR 1 TYPE II; Nominal Resistance:None; Pilot Pressure:Click here; Rotary stiffness:-35 °F to +300 °F; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Drive Power:7/16 in; Case volume:50000; Maximum angular acceleration:9/16 in; Weight (approx.):Static 8000 / Dynamic 2000 (psi); Pilot Pressure:3/4 in; Maximum Permissible Speed (limit Speed):1200 (sfm); Control Fluid Drain:Plain Sleeve; Rotary stiffness:Oilite®, Synthetic Performance Difference®; Control Pressure Measurement:Oil-Impregnated Bronze; Maximum Permissible Pilot Pressure:SAE 841, CT-1000-K26, ASTM B438 GR 1 TYPE II; Torque:None; Moment of inertia rotary group:Click here; Maximum rotational speed:-35 °F to +300 °F; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Load Pressure:7/16 in; Torque:50000; Power:9/16 in; Pilot Pressure:Static 8000 / Dynamic 2000 (psi); Rotary stiffness:3/4 in; Case volume:1200 (sfm); Control Fluid Drain:Plain Sleeve; Maximum rotational speed:Oilite®, Synthetic Performance Difference®; Voltage:Oil-Impregnated Bronze; Control Pressure Measurement:SAE 841, CT-1000-K26, ASTM B438 GR 1 TYPE II; Rate Of Pressure Change:None; Nominal Resistance:Click here; Displacement, geometric, per revolution:-35 °F to +300 °F; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Maximum Torque:7/16 in; Maximum rotational speed:50000; Determining Operating Characteristics:9/16 in; Case volume:Static 8000 / Dynamic 2000 (psi); Rotary stiffness:3/4 in; Displacement, geometric, per revolution:1200 (sfm); Maximum Permissible Speed (limit Speed):Plain Sleeve; Power:Oilite®, Synthetic Performance Difference®; Maximum Volume Flow:Oil-Impregnated Bronze; Flow:SAE 841, CT-1000-K26, ASTM B438 GR 1 TYPE II; Voltage:None; Nominal Resistance:Click here; Drive Speed:-35 °F to +300 °F; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Determining Operating Characteristics:7/16 in; Drive Power:50000; Moment of inertia rotary group:9/16 in; Pilot Pressure:Static 8000 / Dynamic 2000 (psi); Control Pressure Measurement:3/4 in; Case volume:1200 (sfm); Load Pressure:Plain Sleeve; Flow:Oilite®, Synthetic Performance Difference®; Rotary stiffness:Oil-Impregnated Bronze; Maximum rotational speed:SAE 841, CT-1000-K26, ASTM B438 GR 1 TYPE II; Pressurefree Operation:None; Nominal Resistance:Click here; Displacement, geometric, per revolution:-35 °F to +300 °F; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Flow:7/16 in; Maximum Volume Flow:50000; Weight (approx.):9/16 in; Moment of inertia rotary group:Static 8000 / Dynamic 2000 (psi); Nominal Resistance:3/4 in; Maximum rotational speed:1200 (sfm); Load Pressure:Plain Sleeve; Displacement, geometric, per revolution:Oilite®, Synthetic Performance Difference®; Maximum Permissible Pilot Pressure:Oil-Impregnated Bronze; Pressurefree Operation:SAE 841, CT-1000-K26, ASTM B438 GR 1 TYPE II; Maximum Torque:None; Torque:Click here; Sequence Valve:-35 °F to +300 °F; |
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Moment of inertia rotary group:7/16 in; Pressurefree Operation:50000; Power:9/16 in; Maximum Axial Force At Standstill:Static 8000 / Dynamic 2000 (psi); Case volume:3/4 in; Rotary stiffness:1200 (sfm); Maximum Torque:Plain Sleeve; Nominal Resistance:Oilite®, Synthetic Performance Difference®; Drive Power:Oil-Impregnated Bronze; Rate Of Pressure Change:SAE 841, CT-1000-K26, ASTM B438 GR 1 TYPE II; Determining Operating Characteristics:None; Drive Speed:Click here; Sequence Valve:-35 °F to +300 °F; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Drive Power:7/16 in; Voltage:50000; Maximum Axial Force At Standstill:9/16 in; Displacement, geometric, per revolution:Static 8000 / Dynamic 2000 (psi); Maximum angular acceleration:3/4 in; Control Pressure Measurement:1200 (sfm); Pilot Pressure:Plain Sleeve; Maximum Permissible Pilot Pressure:Oilite®, Synthetic Performance Difference®; Rate Of Pressure Change:Oil-Impregnated Bronze; Maximum rotational speed:SAE 841, CT-1000-K26, ASTM B438 GR 1 TYPE II; Maximum Torque:None; Sequence Valve:Click here; Torque:-35 °F to +300 °F; |
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Rexroth PVV4-1X/113RA15DMB Vane pump Video